Paint Shop Safe-#3 FINAL/SWIRL REMOVER

Description:

#3 Final/Swirl Remover is developed to remove swirls, pad marks and light scratches on the new scratch resistant and hard to buff, medium and high solid clears. Recommended as a Machine Polish/Glaze after compounding, or as a stand-alone for light cut polishing needs. Outstanding results are realized on all types of paint/clear including OEM and customs without dusting or swirling.

How To Use:

Always apply to a clean, cool and dry surface. Using a Finish Pad run buffer 1000 – 1500 RPM. Hold pad flat to the surface starting out slow, then speeding up applying light to medium pressure to remove swirls and fine scratches. Continue with overlapping passes while moving slowly side to side.

Reapply as need, but always lighten pressure on final passes and avoid dry buffing. Leave a slight wet film for final hand wipe down using a clean and dry microfiber cloth. DO NOT USE PAPER TOWELS for final wipe down after machine polishing. If you see small scratches after wiping down, you are using the wrong pad or cloth.

“   WARNING: PROP 65 This product can expose you to chemicals including Acetaldehyde and sulfuric acid, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.”