Heavy Swirl Remover Kit

$ 44.77 $ 49.77

Perfect Kit for those Heavy Nasty Swirls. Includes 

#1 Heavy Cut Compound is an aggressive compound designed for machine application. It is recommended for removing 1200 grit or finer sand scratches (or similar-sized finish imperfections) from new or aged paint finishes – factory, custom, foreign or domestic.

#2 Medium Compound is a no swirls compound designed for machine use. It is recommended for removing 1500 grit or finer sand scratches (or similar-sized finish imperfections) from new or aged paint finishes – factory, custom, foreign or domestic.

How To Use:

Always apply to a clean, cool and dry surface. Using a Finish Pad run buffer 1000 – 1500 RPM. Hold pad flat to the surface starting out slow, then speeding up applying light to medium pressure to remove swirls and fine scratches. Continue with overlapping passes while moving slowly side to side.

 

Reapply as need, but always lighten pressure on final passes and avoid dry buffing. Leave a slight wet film for final hand wipe down using a clean and dry microfiber cloth. DO NOT USE PAPER TOWELS for final wipe down after machine polishing. If you see small scratches after wiping down, you are using the wrong pad or cloth

 

“   WARNING: PROP 65 This product can expose you to chemicals including Acetaldehyde and sulfuric acid, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.”